460W Mono PERC 144 Cells Solar Panel 9BB Half Cut Photovoltaic Panel

The panel adopts 166 mm large size 0 optical decay silicon wafer, matched with half piece and multi-main gate mainstream process, redefining the efficient conversion rate of components;Simultaneously launched double-sided version, optional glass back or transparent back. Assembled with multi-busbar PERC cells, the half-cell configuration of the modules offers the advantages of higher power output, better temperature-dependent performance, reduced shading effect on the energy generation, lower risk of hot spot, as well as enhanced tolerance for mechanical loading.

Technology

The PERC cell has a passivated rear side and a laser grooving process, which significantly improves the cell efficiency.
	Half-cut cell is to cut the cell into two seperate parts by mature infrared laser, hence halve the working current. The thermal loss on the ribbon will be remarkably reduced and the module's power increases. The reliability of module is also enhanced.The combination of half-cut cell technology and bifacial module can amplify the gain over the effect of current-reduction.

Materials

12%  Ultra Clear Tempered Glass.	Higher Efficiency,9BB Cells	120N Tensile Strength Frame

120N Tensile Strength Frame	4mm² Qualified cable with MC4	High Transmittance EVA

Electrical Specification

Certifications

• ISO 9001: 2015: ISO Quality Management System
• ISO 14001: 2015: ISO Environment Management System
• ISO 45001: 2018: Occupational Health and Safety
• CE & EU declaration of conformity
• IEC 61215 / IEC 61730 Anti-PID Test for Photovoltaic Module
• IEC 61701 Salt Mist Corrosion Test for Photovoltaic Module
• IEC 60068-2-68 Dust and Sand Test for Photovoltaic Module
• UL1703 / UL 61730 – PV Module Safety Standards

Features

• Positive power tolerance (0~+5W) guaranteed High module conversion efficiency (up to 21.1%)
• Slower power degradation enabled by Low LID Mono PERC technology
• Reduced resistive loss with lower operating current     
• Higher energy yield with lower operating temperature
• Reduced hot spot risk with optimized electrical design and lower operating current 
• Less power loss by minimizing the shading impact 
• Ideal choice for utility and commercial scale projects by reduced BOS and improved ROI
• Industry leading 12 years product warranty  
• Excellent PID resistance
• Positive power tolerance of 0~+3%